500 tons frame hydraulic press

Release date： 2024-05-09

Inquiry

1, the use of integral steel plate welded frame frame, the overall rigidity is good, high compressive strength;

2, the pressure, stroke, pressure can be adjusted according to the requirements of the pressing process;

3, with lower top material, upper material and upper, lower composite top material or shallow drawing and other different derivative models, suitable for a variety of pressing forming process needs;

4, after closing the pressure fast, to reach the rated pressure only a few seconds;

5, the use of lower fuel tank, replacement and cleaning fuel tank is convenient;

6, after more than ten years of mass production, stable quality and reliable performance.

1, metal or non-metal parts of stamping, extrusion forming, shallow drawing, shaping, die and cutting;

2, the typical products that can be pressed are watch cases, watch bands, glasses frames and parts, photo frames, tableware, signs, locks, auto parts and hardware parts.

Model		Units	Specifications
Model		Units	GJH-100	GJH-150	GJH-200	GJH-300	GJH-500	GJH-1000	GJH-1500	GJH-2000
Main cylinder capacity		ton	100	150	200	300	500	1000	1500	2000
System pressure(Max)		Mpa	22	22	22	24	25	25	25	25
Main cylinder stroke		mm	110	110	150	150	150	150	160	160
Open height		mm	360	360	380	380	450	500	650	700
Approaching speed of working table		mm	970	970	1020	1150	1250	1300	1700	2000
Returning speed of working table		mm/s	180	180	135	135	135	90	90	80
Size of working table		mm/s	150	150	100	100	100	100	90	75
Size of working table	L-R	mm	420	420	520	580	740	880	1100	1350
Size of working table	F-B	mm	420	420	500	540	640	860	1100	1350
Overall dimension	L-R	mm	925	925	1150	1200	1400	1540	1680	2400
	F-B	mm	750	750	910	950	1000	1200	1400	2600
	高度	mm	1650	1650	1840	1910	2080	2870	3100	3300
Main motor power		kw	4	5.5	5.5	7.5	15	18.5	18.5	30
weight（Approx）		kg	1600	1800	2400	3300	6500	16000	23000	35000