The new servo drive hydraulic press is an energy-saving and efficient hydraulic press which uses servo motor to drive the main transmission oil pump, reduce the control valve circuit, and control the hydraulic press slide block. Suitable for stamping, die forging, pressing, straightening and other processes.
First, the operator should understand the principle of the hydraulic system, understand the effect of the primary hydraulic components of the equipment, and grasp the operation order of the system. Before starting the equipment, check whether all the motion tissue and solenoid valve are in the initial state, check the oil level of the tank, if you find an anomaly or lack of oil, it should be prohibited to start the hydraulic pump motor, and find a repairman to repair it. The operator should often check the working condition of the hydraulic system, observe the working pressure and speed, and check the workpiece size and prop wear condition to ensure the stable and reliable operation of the hydraulic system.
In winter, when the oil tank temperature does not reach 25 ° C, the executive organizations can not start to work in order, but can only start the hydraulic pump motor to make the hydraulic pump empty. During the summer operation, when the oil temperature in the tank is higher than 60 ° C, pay attention to the investigation of the operating condition of the hydraulic system, and tell the repair personnel to deal with it. The operator shall not damage the interlocking equipment of the electrical system, shall not push the electronic control valve by hand, and shall not damage or arbitrarily move the orientation of each operating file.
3, Stop more than 4 hours of hydraulic equipment, before the start of the operation, should first start the hydraulic pump motor 5-10min to work with pressure. When the hydraulic system is faulty, the operator can not privately move, should immediately report the repair part. Should always adhere to the hydraulic equipment cleaning, to avoid dust, cutting fluid, cutting, cotton yarn and other debris into the tank.
