In the process of production and use of servo hydraulic press, in addition to paying attention to the norms of operation and punctual repair and maintenance, we also want to find ways to improve the efficiency of the servo hydraulic press, how to improve it? Let's briefly introduce a few points:
The operator of the servo hydraulic press should understand the principle of the hydraulic system, understand the effect of the primary hydraulic components of the equipment, and grasp the operation order of the system. Before starting the equipment, check whether all the motion tissue and solenoid valve are in the initial state, check the oil level of the tank, if you find an anomaly or lack of oil, it should be prohibited to start the hydraulic pump motor, and find a repairman to repair it. The operator should often check the working condition of the hydraulic system, observe the working pressure and speed, and check the workpiece size and prop wear condition to ensure the stable and reliable operation of the hydraulic system.
When the oil temperature of the oil tank of the servo hydraulic press does not reach 25 ° C, the executive organizations can not start to work in order, but can only start the hydraulic pump motor to make the hydraulic pump work empty. During the summer operation, when the oil temperature in the tank is higher than 60 ° C, pay attention to the investigation of the operating condition of the hydraulic system, and tell the repair personnel to deal with it. The operator shall not damage the interlocking equipment of the electrical system, shall not push the electronic control valve by hand, and shall not damage or arbitrarily move the orientation of each operating file.
The hydraulic press equipment of the servo hydraulic press shut down for more than 4 hours should start the hydraulic pump motor for 5-10min before starting the operation. When the hydraulic system is faulty, the operator can not privately move, should immediately report the repair part. Should always adhere to the hydraulic equipment cleaning, to avoid dust, cutting fluid, cutting, cotton yarn and other debris into the tank.
The above is how to improve the efficiency of the servo hydraulic press, I hope to be helpful to you, if there is anything you do not know where you can directly communicate with our customer service, we will serve you wholeheartedly, thank you for watching.
